Vehicle Control Addon version 1.2.0.0 for Farming Simulator 2019

This script changes the steering speed depending on the driving speed, and it rotates the camera according to the steering angle and direction. Shift-Left limits the throttle, cruise control, and maximum RPM to 75%. Using Shift-Right and the arrow keys, you can look in the corresponding direction. If you press Left Ctrl together with the W key, the driving direction will remain unchanged. Additionally, there is a simple gearbox. It was never intended to be a super realistic gearbox.

The following gearboxes are available:
- off: standard gearbox without customization;
- IVT: still a standard gearbox but with slight adjustments within the allowable RPM range;
- 4X4: old-fashioned gearbox with 4 gears in 4 groups. Gear shifting takes time and you can lose torque;
- 4PS: the same transmission as above but with power shifting;
- 2X6: two groups with 6 gears each. This transmission is useful for G27 / G29 shifters. There is a low and high range. The 6 gears in each range do not match the 6 gears in the other range;
- FPS: Full Power Shift: the gearbox has 12 gears and shifts without interruption;
- 6PS: 6 gears with power shift: this transmission has 6 gears. Each gear can be reduced by about 80%.

All functions can be toggled using the following default key combinations:
- Left Ctrl + C: settings;
- Left Ctrl + W: bind angle (continue);
- Left Alt + W: bind angle (reset);
- Left Shift: throttle limiter / cruise control speed reduction;
- Right Shift + arrow keys: look forward, backward, left, right;
- Space: change direction (so-called shuttle control).

Please check the keys for toggling.
G27/G29 shifters are supported.
The 7th gear is special. If you use the ksmShifter7 action binding, make sure shuttle control is enabled. This action binding will switch to the 1st reverse gear.
The best transmissions combined with the shifter are 2X6, FPS, and 6PS.