Version from ModHub.

- Improved idle mode and manual clutch;
- Wheel slip and cruise control;
- Speed ​​limiter;
- Compatible with CabView mod.
This script varies the steering speed depending on the speed you are driving, and it rotates the camera to match the steering angle and direction. Shift-Left limits throttle, cruise control and maximum rounds per minute to 75%. With Shift-right and the cursor keys you can peek in the corresponding direction. If you press Ctrl left together with W then the driving direction snaps to fixed directions.

All functions are switchable with the following default key combinations:

- [Ctrl Left + C]: Settings
- [Ctrl Left + W]: Snap Angle (continue)
- [Alt Left + W]: Snap Angle (restart)
- [Shift Left]: Throttle limiter / reduced cruise control speed
- [Shift Right + Cursor]: look forward, backwards, left right
- [Space]: Change direction (aka shuttle control)
- [[]: Gear up
- [']: Gear down
- []]: Range up
- [#]: Range down
- [;]: Neutral and handbrake

- Fixed rare display of angle "nan°";
- Updated translations.
The modification brings more information about the vehicle to the screen and adds several new features. Adds heading mode to your vehicle (he calls this a temporary fix until GPS / Guidance Steering is released), differential locks, four-wheel drive modes, and improved hydraulic control. It also shows more details of the car in the HUD.

- Damage values ​​in% for the driven machine and all its attachments.
- Fuel level for diesel / AdBlue / electric / methane and current fuel consumption.
- Current status of differential lock and 4WD mode.
- Current engine speed and temperature.
- The current weight of the driven vehicle and the total weight with all its accessories and weights.

Below is a list of control buttons:

- Ctrl + End – fix the direction of movement;
- Shift + End – previous direction of movement;
- Ctrl + Home – rotate and fix the direction (180 °);
- Ctrl + PageUp and Ctrl + PageDown – change direction by 45 °;
- Shift + PageUp and Shift + PageDown – change direction by 1 °;
- Ctrl + Shift + PageUp and Ctrl + Shift + PageDown – change direction by 22.5 °;
- Ctrl + Num 7 – enable / disable the differential on the front axle;
- Ctrl + Num 8 – connect / disconnect the differential on the rear axle;
- Ctrl + Num 9 – switch the mode of full (4WD) / not all-wheel drive (2WD);
- Ctrl + Num / – reset the interface on errors or after changing the mod interface settings;
- Ctrl + Num * – reload XML file when to display changes without reloading the game;
- Shift + Home – disable / enable information display (Damage and fuel).

AIVehicleExtension contains an alternative hired worker that can work on fields with irregular edges. It has some additional features like a circular mode and headland support. This mod automatically inserts itself into all vehicles if they already support the normal hired worker. Only exception are vehicles with articulated axis.

When starting this alternative helper it briefly scans the field at the current vehicle position. But apart from this, the alternative hired worker has only a little idea of where it is on the field. Instead, this mod looks, starting from the current position, for the border between untouched and already worked area is.

On beautiful rectangular fields with lots of free space around you can better use the normal hired worker. If you want to follow a certain path on the field then I recommend using CoursePlay. The mod FollowMe is great for simple following tasks. I have the two mods together with AIVehicleExtension in my mods folder.
Many thanks to Gonimy-Vetrom for the nice reworked icons and to all other contributors on Github

Here are the most important input bindings:

- H: Start or stop the hired worker;
- Left control + H: Open the settings dialog;
- Left shift + H: Open the head up display;
- Left alt. + H: Toggle automatic steering;
- Left alt. + V: Raise or lower all tools;
- Left alt. + 5: Toggle circular mode;
- Left alt. + 6: Swap side.

This mod adds 3 speed memory to vehicles. With buttons 1,2,3, the corresponding speed memory is selected and activated. With Numpad + / - the speed of the selected speed memory can be changed. Buttons can be configured in the game settings.

Note: To be able to use Speed ​​Control cruise control with gamepads, you must first assign keys and buttons.

- Current version of the mod.
Easy Development Controls is designed as a testing tool for modders, mappers and content creators. It can also assist with gameplay setups or however you wish to play the game.

It includes some features available already through the game console commands but now easily accessible and also the addition of many new features.

Most features support use in Multiplayer and permission levels of some commands can also be adjusted. This now also includes existing console commands that previously only worked for the host.

Some quality of life features have also been added as follows.

- Teleport: Quickly move yourself or vehicles around the map by selecting a location on the map, by field number or x/z coordinates.
- Flip Vehicles: Allows a user to easily correct upright rotation of a vehicle.
- Super Strength: Increases a players carrying capacity and pickup range.
- Hud Visibility: Shows and hides the whole hud, you can also activate a key binding for faster access.
- Show Bale Locations: This will display all farm owned bales on the map.
- Show Pallet Locations: This will display all farm owned pallets on the map.
- Advance Growth: Advances all crops to the next growth stage.

With the extended number of features plus many new features planned, Easy Development Controls has something for everyone.

- Updated Russian translation;
- Fixed interactive buttons not working.
'Interactive Control' is a global script mod for Farming Simulator 22. While this mod is active, you are able to use many other mods that support Interactive Control. With IC you get the possibility to control many parts of several (prepared) vehicles interacitvly.

'IC' provides different possibilities to interact with your vehicles. You can use click icons that appear when you turn on IC or when you are nearby. Another way for interactive handling is a key binding event. The controls are able to be used as switch or to force a state. All interactions are generally possible to use from the inside and the outside of a vehicle.

Using the controls you can steer different things:

- Play animations (e.g. to open/close windows, fold/unfold warning signs, ...)
- Call specific functions (e.g. Start/Stop Motor, TurnOn/Off tool, Lift/Lower attacher joints, ...)
- ObjectChanges (to change translation/rotation/visibility/...)

- Removed message in onDelete function.
A small but very useful script allows you to use the Ctrl + T keys to activate or deactivate the ability to switch to a specific vehicle. That is, if you deactivated this feature for a specific vehicle, then when you press the TAB key, you will no longer switch specifically to this technique, but you can return the tab back at any time.

There is a special icon at the bottom, so you will always know whether the script works for the current vehicle or not (see screenshots).

Disabling the ability to quickly move between vehicles using the TAB key.

A point for repairing and servicing your vehicles.

- Price: 2000 euros;
- Daily upkeep: 10 euro/day.

- Added 2 small canopies;
- Updated version of ModDesc;
- Fixed bugs.
A pack of two sheds where you can store bales and vehicles.

- Price: $25,000;
- Upkeep: $15/day.