Materials of the author «Mogli» 4

This script changes the steering speed depending on the driving speed, and it rotates the camera according to the steering angle and direction. Shift-Left limits the throttle, cruise control, and maximum RPM to 75%. Using Shift-Right and the arrow keys, you can look in the corresponding direction. If you press Left Ctrl together with the W key, the driving direction will remain unchanged. Additionally, there is a simple gearbox. It was never intended to be a super realistic gearbox.

The following gearboxes are available:
- off: standard gearbox without customization;
- IVT: still a standard gearbox but with slight adjustments within the allowable RPM range;
- 4X4: old-fashioned gearbox with 4 gears in 4 groups. Gear shifting takes time and you can lose torque;
- 4PS: the same transmission as above but with power shifting;
- 2X6: two groups with 6 gears each. This transmission is useful for G27 / G29 shifters. There is a low and high range. The 6 gears in each range do not match the 6 gears in the other range;
- FPS: Full Power Shift: the gearbox has 12 gears and shifts without interruption;
- 6PS: 6 gears with power shift: this transmission has 6 gears. Each gear can be reduced by about 80%.

All functions can be toggled using the following default key combinations:
- Left Ctrl + C: settings;
- Left Ctrl + W: bind angle (continue);
- Left Alt + W: bind angle (reset);
- Left Shift: throttle limiter / cruise control speed reduction;
- Right Shift + arrow keys: look forward, backward, left, right;
- Space: change direction (so-called shuttle control).

Please check the keys for toggling.
G27/G29 shifters are supported.
The 7th gear is special. If you use the ksmShifter7 action binding, make sure shuttle control is enabled. This action binding will switch to the 1st reverse gear.
The best transmissions combined with the shifter are 2X6, FPS, and 6PS.

Version from ModHub.

- Improved idle mode and manual clutch;
- Wheel slip and cruise control;
- Speed ​​limiter;
- Compatible with CabView mod.
This script varies the steering speed depending on the speed you are driving, and it rotates the camera to match the steering angle and direction. Shift-Left limits throttle, cruise control and maximum rounds per minute to 75%. With Shift-right and the cursor keys you can peek in the corresponding direction. If you press Ctrl left together with W then the driving direction snaps to fixed directions.

All functions are switchable with the following default key combinations:

- [Ctrl Left + C]: Settings
- [Ctrl Left + W]: Snap Angle (continue)
- [Alt Left + W]: Snap Angle (restart)
- [Shift Left]: Throttle limiter / reduced cruise control speed
- [Shift Right + Cursor]: look forward, backwards, left right
- [Space]: Change direction (aka shuttle control)
- [[]: Gear up
- [']: Gear down
- []]: Range up
- [#]: Range down
- [;]: Neutral and handbrake

AIVehicleExtension contains an alternative hired worker that can work on fields with irregular edges. It has some additional features like a circular mode and headland support. This mod automatically inserts itself into all vehicles if they already support the normal hired worker. Only exception are vehicles with articulated axis.

When starting this alternative helper it briefly scans the field at the current vehicle position. But apart from this, the alternative hired worker has only a little idea of where it is on the field. Instead, this mod looks, starting from the current position, for the border between untouched and already worked area is.

On beautiful rectangular fields with lots of free space around you can better use the normal hired worker. If you want to follow a certain path on the field then I recommend using CoursePlay. The mod FollowMe is great for simple following tasks. I have the two mods together with AIVehicleExtension in my mods folder.
Many thanks to Gonimy-Vetrom for the nice reworked icons and to all other contributors on Github

Here are the most important input bindings:

- H: Start or stop the hired worker;
- Left control + H: Open the settings dialog;
- Left shift + H: Open the head up display;
- Left alt. + H: Toggle automatic steering;
- Left alt. + V: Raise or lower all tools;
- Left alt. + 5: Toggle circular mode;
- Left alt. + 6: Swap side.

This script allows you to unload bales with a filling level of 75% or more. The mod is configured in the My file Games\FarmingSimulator2022\modSettings\unfinishedBalesConfig.xml . Works only with roll balers.