Materials of the author «MAPBEH» 15

- Fixed all errors in the log at once;
- Removed all configs from Kulibin (engine and wheels), as they caused problems;
- Currently, only a warning about intersecting retractable support models appears, because the support model itself was initially set up incorrectly by the author of this mod's conversion; I will not reconfigure all supports, as it is a waste of time since this warning does not affect anything.

UP. The mod will no longer be updated in the future because all errors have been fixed. If anyone wants to add tuning to it, feel free to do so, as the tuning that was in it was all crooked and flawed, and I removed it to avoid problems with the mod itself. The mod is now in its release version.
Kamaz Crane Truck - Galichanin.

- Fixed the telescopic boom;
- Fixed the cable;
- Fixed the hook;
- Fixed the windows (slightly tinted, but not by me, the author did not include themselves in the mod description, so I don’t know who tinted them), because they looked too white, like mirrors.

Additional notes:

- Removed the rotation of the hook itself, but kept the rotating attacher – i.e., the load still rotates, but the hook itself does not, because I got tired of constantly straightening it in transport position so it would face vertically. Now it stays perfectly straight in transport position + the ability to rotate the load in any direction is preserved.

It attaches absolutely all spreader bars where the attacher = trailer. If the spreader bar does not attach, hold RMB+LMB and rotate the invisible attacher on the hook to the right or left, and everything will attach properly. The price is $50,000.

PS. The chassis is the same as before, from the original converter kulibin.

FS17 Author: Filin Special Equipment;
FS19 Converter: kulibin;
Crane fixed by: MAPBEH.

Tower crane - Liebherr 81k. Took the crane out of the pack with the Mercedes manipulator (in that pack, the hook attacher on the crane didn’t work at all, and it didn’t hook any spreader bars).

- Fixed the hook attacher. Now it hooks absolutely all spreader bars where the attacher = trailer;
- Adjusted the counterweight mass, now it is 2 tons per x1 counterweight plate;
- Minor correction to the cost of the crane itself + the cost of its counterweights.

Original authors: BRUNDAVO/BOSMER (they were listed in the moddesc);
Crane fixed by: MAPBEH.

- Fixed all errors in the log immediately;
- Currently, the mod only shows 2 warnings about duplicate specialization, because originally the entire moving part of the mod was written through a "fifth degree," I didn't bother digging into it, since ideally, it all needs to be rewritten from scratch, but there's no point in that because it's not an error and it doesn't affect anything. If anyone wants to rewrite it – go ahead, I won't spend my time on it.

UP. The mod will no longer be updated because all errors in the log have been fixed and this is the release version.
Zil 130 - Crane Truck.

- Completely redesigned the entire crane setup;
- Fixed the boom;
- Fixed the cable;
- Fixed the hook;
- Fixed the animations.

Additional details:

Increased the boom lift angle so that loads can be lifted close to the vehicle; completely changed the cable routing – now it properly lifts all the way to the top. Left the hook rotating since the crane originally had no transport position, so the direction it faces doesn’t really matter. The load rotates in all directions along with the hook itself.

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar doesn’t attach, hold RMB+LMB and rotate right or left, and it will attach properly. The price is $30,000.

P.S. The chassis is the original one from the converter author kulibin.

FS17 Author: 36region, Igoryan FS17, kran, -=F@RMeR=-
Converted to FS19: kulibin;
Crane fixed by: MAPBEH.

- Fixed all errors in the log at once;
- Now there is only an informational warning about hydraulics, well, the crane is kind of cable-based, but the entry in it is from Hydra, of course, I will not rewrite its entire original config from scratch, because it is a waste of time since this informational warning does not affect anything.

UP. The mod will no longer be updated because all errors in it have been fixed. The mod is now in the release version.
Liebherr HS875 Crawler Crane:

- Completely redesigned the crane assembly;
- Fixed the boom – now it lowers and raises as it should;
- Fixed the cable;
- Fixed the hook;
- Fixed all animations;
- Fixed the boom counterweight and its interaction animations with the boom and cables.

Additional:

- Added and configured a 980-liter fuel tank + added a fuel gauge for this tank on the in-game dashboard, fuel type – diesel.

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar doesn’t attach, hold RMB+LMB and rotate the hook right or left, and it will attach properly. Price is $100,000.

PS. The chassis and counterweight remain the same, from the authors Giants / Pummelboer, Nonnus.
Authors of the crane and its counterweight: Giants / Pummelboer, Nonnus.
Crane fixed by: MAPBEH.

- Fixed all errors in the log at once;
- Now only an informational warning about hydraulics appears, well, the crane is kind of cable-operated, but the entry in it is from Hydra, of course, I will not rewrite its entire original config from scratch, as it is a waste of time since this informational warning does not affect anything.

UP. The mod will no longer be updated as all errors in it have been fixed. The mod is now in the release version.
Sany SY35U Crawler Crane (essentially a reskin of the Liebherr HS875 crane).

- Completely redesigned the crane assembly;
- Fixed the boom – now it lowers and raises as it should;
- Fixed the cable;
- Fixed the hook;
- Fixed all animations;
- Fixed the boom counterweight and its interaction animations with the boom and cables.

Additional features:

- Added and configured a 980-liter fuel tank + added a fuel gauge for this tank on the in-game dashboard, fuel type – diesel

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar does not attach, hold RMB+LMB and rotate the hook right or left, and it will attach properly. Price is $100,000. Cranes do not conflict with each other (you can use both the base crane without the skin and this one).

PS. The chassis and counterweight remain the same, from the authors Giants / Pummelboer, Nonnus.
Crane and counterweight authors: Giants / Pummelboer, Nonnus.
Crane fixed by: MAPBEH.

- Fixed all errors in the log immediately;
- Reconfigured suspension, differential, wheels, mass (the crane's lifting capacity increased by about 1.5 times).

UP. There will be no more updates for this mod as all errors in the log have been fixed, and the characteristic rebalance to improve the crane's efficiency has been completed, so the mod is now in its release version.
Kamaz Truck Crane - Klintsy. Converted the crane from FS17; all boom animations (+telescoping), cable, hook, driveshaft, suspension, etc. work properly.

Added a 350-liter fuel tank, configured the differential, installed the Kamaz engine, enabled courseplay support (moves freely along routes without issues), animated the dashboard, fully configured lighting (including instrument panel illumination), sound, smoke, dust from the wheels, rearview mirrors, applied dirt + aging effects, removed the stock steering wheel and replaced it with a classic Kamaz steering wheel because the stock wheel made it hard to see the dashboard.

Additional features:

- Removed rotation of the hook itself, but kept the rotating attacher—meaning the load still spins, but the hook does not, as I got tired of constantly straightening it in transport position so it faced vertically. Now it stays perfectly straight in transport position + the ability to rotate the load in any direction is preserved.

- Hooks absolutely all spreader bars where attacher = trailer. If a spreader bar doesn’t hook, hold RMB+LMB and rotate the invisible attacher on the hook right or left, and it will hook properly. Price is $40,000.

Original author in FS17: Eraevgenij
Mod converted to FS19 by: MAPBEH

Ural Next - truck crane. The chassis of the Ural Next by author Axary was taken as a base and modified by me for the Chelyanets crane installation. The crane installation itself was fully converted from FS17 and configured by me.

- The chassis and crane are fully animated, everything works perfectly: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, boom (including telescopic boom), outriggers, cables, hook, etc.;
- Fully configured equipment wear and a completely dirtyable chassis;
- Hooks up to absolutely all traverses where the attacher = trailer. If the traverse does not hook, hold RMB+LMB and rotate the hook, and everything will hook properly. The price is 65,000.

UP. There are no errors in the log because I release this mod directly in the final version; there will be no further revisions for this mod, only hotfixes if necessary.

Chassis author in FS19: Axary.
Crane installation authors in FS17: Eraevgenij, Chev.
Author of the crane installation conversion from FS17 to FS19, as well as its configuration and mod assembly: MAPBEH.

Ural 44202 - truck crane. The chassis of the Ural 44202 by author Axary was taken as a base and modified by me for the Chelyanets crane installation. The crane installation itself was fully converted from FS17 and configured by me.

- The chassis and crane are fully animated, everything works perfectly: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, boom (including telescopic boom), outriggers, cables, hook, etc.;
- Fully configured equipment wear and fully dirtying chassis;
- Attaches to absolutely all traverses where the attacher = trailer. If the traverse does not attach, hold RMB+LMB and rotate the hook, and it will attach fine. The price is 60000.

UP. There are no errors in the log, as I release this mod immediately in the final version; there will be no further improvements for this mod, only hotfixes if necessary.
UP2. Found a way to fix the crooked text near the outrigger deployment button; I will fix it later when I have time, and also on all other cranes.

Chassis author in FS19: Axary.
Crane installation author in FS17: Eraevgenij, Chev.
Converter of the crane installation from FS17 to FS19, as well as its configuration and mod assembly: MAPBEH.

Hitachi log grapple for crane. I took the Hitachi excavator log grapple as a base and modified it to work with cranes.

Features:

- All animations, can grab any dynamic objects and some small machinery with a proper collision model, but is primarily designed for loading and unloading timber and logs using cranes (see screenshots);
- Works on all cranes I have made (grapple control by holding both LMB+RMB simultaneously); functionality on cranes by other authors is not guaranteed since it’s unknown how they implemented crane controls, but on my cranes everything works perfectly;
- Log is completely clean, no errors;
- Price: 15000.

Original version authors in FS 19: BlackSheep Modding, Richwoodrocket;
Mod rework and tuning author: MAPBEH.

Hitachi Grapple for Crane. I took the Hitachi excavator grapple as a base and modified it to work with cranes.

Features:

- Gets dirty, can be washed, all animations included, unique feature of the grapple – a collision model that disables when the buckets open (when the grapple buckets are open, their collision model automatically disables, allowing the buckets to sink into textures like sand (see screenshot), simulating digging, unlike other grapples that just scrape the surface and cannot sink into materials like sand);
- Works on all cranes I have made (grapple control is by holding both LMB+RMB simultaneously). Functionality on cranes by other authors is not guaranteed since it’s unknown how they implemented crane controls, but on my cranes everything works perfectly;
- Log is completely clean if all crops and bulk materials like sand are present on the map (on base maps without sand, a warning will appear that the crop is not found);
- Loads all standard crops + almost all bulk mod materials;
- This grapple will not work on consoles because they do not support the automatic disabling of bucket collision mechanics (an informational warning appears – the mod is intended for PC players only!);
- Grapple capacity: 10,000 liters;
- Price: 10,000.

The mod has been fully tested by me on the Village Berry map and works without any issues.

UP. With the buckets open, the mod sinks into any texture because the bucket collision model is disabled at that moment. To properly place the grapple on the ground or load it onto a vehicle for transport – close the buckets!
UP2. Remember that to load anything, you must own the land plot! You cannot load someone else’s sand without purchasing the sand plot.

Original FS19 version authors: Victor98, perry;
Mod rework and tuning author: MAPBEH.

Spreader beam for lifting machinery and various large-sized objects. I based it on the spreader beam from FS 17 by iksman, converted it to FS 19, and completely reconfigured it so that it can now work with cranes and lift various loads.

Features:

- All animations, can grab any dynamic objects and machinery that have a proper collision model;
- Works on all cranes that I made (control of the spreader beam with held LMB+RMB = side flaps, and with MMB (held mouse wheel) = control of the lower legs), functionality on cranes by other authors is not guaranteed since it’s unknown through which “node” they implemented crane controls; on my cranes, everything works perfectly;
- Log is absolutely clean, no errors, only a single warning about a second component in the i3d file – but this is just the default camera of the 3D editor itself, so this warning does not affect anything;
- Price: 20000.

Original version author in FS17: iksman;
Author of the FS17 to FS19 spreader beam conversion, as well as its refinement and configuration: MAPBEH.

Ural 44202 - fire truck ladder. The base was taken from the Ural 44202 chassis by the author Axary and the fire truck ladder based on the ZIL from FS 17 by the authors arshinskiy03, iksman.

- The chassis and ladder are fully animated, everything works absolutely: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, ladder (including ladder extension), supports, etc.;
- Fully dirtying and wearing chassis;
- The fire truck ladder has a built-in collision model that allows the character to move on it at any ladder incline angle and climb to various heights, and it can also be used as a ladder for cutting down trees. The price is 45000.

UP. There are no errors in the log because I am releasing this mod immediately in the release version; there will be no further improvements to this mod, only hotfixes if necessary.

UP2. I will not repaint it in fire truck colors or add a beacon on the roof because I do not want to cut down trees with fire equipment, so anyone who wants to repaint it – go ahead, the equipment is fully ready, configured, and scripted.

Chassis author in FS19: Axary.
Ladder author in FS17: arshinskiy03, iksman.
Author of the ladder conversion from FS17 to FS19, as well as its settings and mod assembly: MAPBEH.

Chelyabinsk construction crane based on the highly maneuverable Manitou chassis. I used the chassis from a Manitou telescopic loader as the base, where I fixed the support hydraulic cylinder bug – now they work as they should.

Mod features:

- Unique chassis with excellent maneuverability thanks to the choice of 4 movement modes: steering with all 4 wheels, steering with only the front two wheels, crab movement (diagonal) to the left and right respectively – mode selection is controlled by left Ctrl + Y. However, due to this chassis, I had to abandon courseplay because courseplay constantly selects crab mode and drives diagonally either left or right. This is a bug in courseplay itself, as it simply does not account for chassis with selectable driving modes at all (so either we move under our own power or transport it on a trailer; the crane weighs 30 tons);
- Fully functional crane installation, all animations, telescopic boom extension, cable, hook, outriggers, lights, hazard lights, etc. Price is 80,000.

UP. There are no errors in the log because I am releasing this mod immediately in the stable version. There will be no further improvements to this mod, only hotfixes if necessary.

Chassis authors in FS 19: GR40 / CYSG;
Mod assembly and setup author: MAPBEH.

Grapple for dynamic objects. Based on the grapple from FS17 by iksman, converted it to FS19 and reconfigured it so that it can be used on cranes.

Mod features:

- Can grab any dynamic objects such as stones for stone crushers, coal, debris, etc. As well as any other small dynamic objects with a proper collision model;
- Fully animated, works on all cranes I have made, functionality on cranes from other authors is not guaranteed since it is unknown through which "joint" they implemented crane control, but on my cranes it works perfectly;
- The log only shows an informational warning that there are 2 objects in the 3D file, but the second object is just the camera of the 3D editor itself, so this warning is not an error and does not affect anything. Price is 15,000.

Author in FS17: iksman;
Mod converted to FS19 and reconfigured by: MAPBEH.

Kraz 258 - truck crane. The chassis Kraz 258 by author Karl911 was taken as a base and modified by me for the Ulyanovets crane installation. The crane installation itself was fully converted from FS17 and configured by me.

- The chassis and crane are fully animated, everything works absolutely: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, boom (including telescopic boom), outriggers, cables, hook, etc.;
- The entire vehicle, including the crane installation, gets dirty and can be washed;
- Hooks up to absolutely all traverses where the attacher = trailer. If the traverse does not hook, hold RMB+LMB and rotate the hook, and it will hook properly. The price is 55,000.

Chassis author in FS19: Karl911.
Crane installation author in FS17: Eraevgenij.
Author of the crane installation conversion from FS17 to FS19, as well as its configuration and mod assembly: MAPBEH.