Materials of the author «Vova_M» 13

Good day, ladies and gentlemen.
I decided to try mastering Blender and make a couple of goodies for myself, and at the same time, I decided to share them with you—maybe someone will like them.
This mod will add a couple of marker lamps with repeaters to the low-loader. They can be installed in exclusive mode. I tried to make the trailer more noticeable at night, and since in 1.40 the nighttime graphics were improved, it’s more pleasant to drive at night (well, that’s just my opinion). This is my first work, and I made it by trial and error )))) I tested it on version 1.40 beta... In short... install it... check it out... and then you decide whether you need it or not.

P.S. Please don’t be too harsh on the first work and the presentation.

Good day, ladies and gentlemen.
In this mod, you can see additional clearance lights on the front bumper and a shifted license plate on the Kenworth W900.
Tested on 1.40

P.S. This is my second work... still learning... please excuse me if anything.

Good day, ladies and gentlemen.
In this mod, you can see additional clearance lights on the tanks and the footstep on the Kenworth W900.
This can be installed when selecting the lights on the cab. Choose the Studio Sleeper cab and the chassis with a 300-gallon tank, and it will look great )))

P.S. This is my latest work .... just learning ... if anything, I apologize, I'm trying to get familiar with Blender

Good day, ladies and gentlemen.
I present to you another small exterior tuning modification for the Kenworth W900. A few pleasant minor tuning touches won’t hurt.
When selecting the Studio Sleeper cab and chassis with a 300-gallon tank, you will see:
- Closed frame (near the fifth wheel)
- Added a couple of brake lights and reverse lights on the rear bumper
- Added reverse lights and a couple of brake lights with repeaters on the rear of the sleeper
- Added protection between the wheels (with turn signal repeaters and marker lights on them)
- Added a pair of headlights (low and high beam) on the front bumper
- Added antennas on the edges of the front bumper
- The front bumper’s non-standard flags were lowered
- Placed the Peterbilt 389 hood ornament on the radiator grille
This mod works in the following order (with other mods), numbered from top to bottom:
1. This mod
2. Lights on the front bumper
3. Marker lights mod

P.S.
There is one downside I haven’t fixed... the antennas on the bumper are not visible from the cab. I made these improvements while learning Blender... self-study and YouTube videos help improve in-game changes that bring joy. If something doesn’t please you, I apologize. I made separate mods so that if someone doesn’t like something, they can install what they prefer.

Good day, ladies and gentlemen and just gaming enthusiasts.

I want to present to you my small modification for the stock Volvo FH16 2012. (not compatible with mods replacing the stock Volvo FH16 2012)
Mod for the stock Volvo FH16 2012
This truck already has plenty of interesting features, but there were still a few things I didn’t like. I drive it often myself, and I was not satisfied with the very small navigator, plus I slightly improved the exterior — a small detail, but it looks nice.
In this mod you will see:
Navigator in the form of a tablet
Roof spoiler (with clearance lights)
Side fairings on the edges of the cab (with clearance lights)

Tested on version 1.40 (works on 1.39 but there are issues with the panel backlight (it overexposes, even if you set the slider to minimum in the settings))

Requires DLC FH Tuning

P.S. I’m not a modding pro, just learning)) If something doesn’t please you, I apologize.
Thanks for stopping by and enjoy your game.

Good day to you, ladies and gentlemen, or simply players.
I want to present to you a small modification of the default low-frame trailer. In it, you can see...

On the sides, additional marker lights with repeaters
On the bumper, you can find brake lights (from the Volvo tuning pack)
Logs and a ladder placed on the trailer
Now there are spare wheels for the road
A toolbox
Small ramps (just in case)
Additional strobes and an oversize bar

P.S. While driving this trailer, it seemed a bit empty to me. So I decided to decorate it a little externally. Now, at night, you will better see the trailer’s dimensions, and from the third-person view, it won’t look empty if you’re hauling cargo. Thank you very much for stopping by to take a look. Enjoy your game.

Good day, ladies and gentlemen.
I decided to take a ride on the timber truck and, of course, did some work on it in Blender. Since with update 1.40 it’s nice to drive at night (well, that’s my opinion), but when you’re reversing, you can’t see what’s going on back there. So I added a couple of improvements to the default Schwarzmüller trailer (timber truck)... made it for myself and, as always, I’m sharing it with you.

This mod requires the Schwarzmüller Trailer Pack DLC.
In this modification, you will see...

- Marker lights on the side posts.
- Marker lights on the front part of the trailer.
- Additional brake lights on the bumper.
- Additional reverse lights on the sides of the trailer (for better rear visibility).
- A slight modification to the rear bumper.
- A wooden floor appeared on the frame.
- Additional side guards on the trailer.

Game version: 1.40
Mod version: 1.0.1

P.S. Thanks to everyone who stopped by here... enjoy the game...

Good day, ladies and gentlemen, or just kind people.
I present to you the refined Freightliner Cascadia… everything is made for the stock truck. In this mod, you will be able to see changes in the appearance (purely for aesthetics and at the request of a person)…
Clearance lights around the perimeter of the truck.
Stop signals and reverse lights were added to the rear part of the frame.
Additional aluminum shields appeared on the frame.
Additional reverse lights are lit on the cab.
Red clearance lights appeared on the side spoilers (for the cab).
All skirts (under the bumper and side deflectors) are painted in the color of the truck.
The sun visor on the windshield is slightly modified.
A pneumatic horn was added on the roof of the cab (middle).

Game version: 1.40
Author: Vova_M

Good day, ladies and gentlemen.
Many of you play with mods that do not have a built-in navigator, myself included. And by default, it is too small. So I decided to fix this and share it with everyone.
In this mod, you can see an enlarged GPS navigator that is mounted on the windshield.
For this, you need to have the Cabin Accessories mod.


P.S. I tried to adjust the navigator's position in all vehicles so that it does not stick out beyond the front pillar. If something is wrong, I apologize.

Good day, ladies and gentlemen.
In this mod, you will see...

On the front pillars, door trims in the color of the interior
And the handbrake handle has been changed

Good day, ladies and gentlemen.

In this mod ...
Fuel capacity is doubled in all trucks by default.
All-wheel drive is enabled on all chassis by default.
All chassis are available from level zero.

Game version: 1.40+

Good day, ladies and gentlemen.
I suggest you try a mod with an additional monitor that will show the view (from the right side) of the camera located near the navigator.

Good day, ladies and gentlemen.

In this mod you can see...
1. The front grille has been enlarged (downwards).
2. The front bumper was lowered and painted in the truck's color (matched to the grille).
3. The bottom of the doors was also slightly changed (on double cabs).
5. The rear wheel guards are painted in the truck's color.
6. The aero kit is painted in the truck's color.

P.S. I tried not to spoil the truck's appearance... I make it for myself and, as always, share it with you.
Thank you for stopping by to take a look and enjoy your game.