Materials of the author «kenny456» 45

Changelog 1.1.0.0
- Fixed a bug where the crane did not fold properly on the trailer.
- The trailer now disappears after unfolding and cannot be used.
- Before updating, you need to sell your old cranes.
This is a railway forest crane for loading and unloading logs. It has a large grab, so you can pick up many logs at once.
It arrives at your store folded on a trailer. Take the trailer to the desired location and unfold it like a standard implement.
- Construction configuration: standard or extended arm.
- Color of your choice
- Work lights

Price: $110,000/$120,000
Railway range: 35 m
Maximum lift: 6 m

IMPORTANT:
- Before unfolding, you must detach the trailer from the truck.
- Be sure to unfold it on a flat surface so the unfolding area is clear.
- Do not use the interior and work cameras before unfolding the crane (they will not work)

Default controls:
Crane left/right — AXIS_CRANE_ARM
Cab forward/back — AXIS_CRANE_ARM3
Grab up/down — AXIS_CRANE_ARM4
Grab rotation — AXIS_CRANE_TOOL2
Close/open grab — AXIS_CRANE_TOOL

If you find any errors or issues, let me know in the comments or at [email protected], and I will fix it in the next version.

These are standard logging machines with an auto-loading function
Log cleared

With this machine, you can saw logs to a specified length and then split them into small pieces for firewood. A placeable sales point is included, where you can sell your firewood for a higher profit (2 times the default). It also accepts standard logs, but the profit is the same as at other wood sales points.

- Cut length: 35-70 cm;
- Splitting options: 2, 4, or 6 parts;
- Input log size: max. 8 m (2 - 6 m with self-loader), min. diameter: 300 mm;
- Important: the smaller the log diameter, the fewer splits are needed (otherwise the wood will be wasted);
- Loading options:
1. Place the log directly into the feeder with any loader;
2. Place the log into the self-loader on the left side and press the load button;
3. Use auto-loading (park the machine near a pile of logs and press the load button).
- You can unload firewood using the belt (adjustable height);
- Current cut length and diameter are displayed in the F1 menu;
- All controls can be configured in the control settings;
- Price: $45,000 / 100$.

Controls:

- KEY_o - Load a wood log;
- KEY_z / KEY_lalt KEY_z - Move the wood log forward/backward;
- KEY_b - Cut the wood log;
- KEY_v - Split the wood log;
- KEY_u - Start/stop unloading firewood;
- AXIS_CRANE_ARM — set cut length;
- AXIS_CRANE_ARM2 - Raise/lower the unloading belt;
- AXIS_CRANE_ARM3 — set split diameter.

This machine can be used for loading and unloading sea containers of various sizes. Supported containers:

- Wooden container from the Platinum DLC;
- 20-foot, 25-foot, 30-foot, 35-foot, 40-foot, and 45-foot containers from the Hispano mod

Wooden containers can only be secured using tension straps.

- Price: $340,000;
- Power: 462 hp;
- Max. speed: 63 km/h;
- Stacking height: 3 containers;
- Color configurations.

Default controls:

- Lift container - AXIS_CRANE_ARM2
- Side movement - AXIS_CRANE_ARM
- Adjust grab size - AXIS_CRANE_ARM3
- Rotate seat - AXIS_CRANE_ARM4

Important! Do not adjust the grab size (AXIS_CRANE_ARM3) when containers are attached. Otherwise, the container will change position.

The log aligner is used to align logs so that they fit well on the truck. You can use it for logs ranging from 4 to 7 meters in length.

Usage:

- Pick up logs with the loader from the pile;
- Place them on the log aligner and open the "claws";
- Then load the aligned logs onto the truck.

Features:

- Price: $35,000;
- Color selection;
- Log length: 4-7 m.

If you find any errors or issues, please let me know in the comments or at [email protected], and I will fix it in the next version.

This machine can be used for loading/unloading logs and handling shipping containers.

- Price: $320,000;
- Power: 362 hp;
- Max. speed: 25 km/h;
- Max. telescopic boom reach: 8 m;
- Container stacking height: 5 containers;
- Wheel configurations;
- Design configurations;
- Color configurations;
- Category: forestry equipment;
- Various configurations.

Container configuration:

- Can attach wooden containers from the Platinum DLC;
- Can attach all 20-foot, 25-foot, 30-foot, 35-foot, 40-foot, and 45-foot containers from Hispano mods;
- Wooden containers can only be attached using tension belts.

When operating at higher levels, it is recommended to deploy the front stabilizers.

Important! Do not change the grab size (AXIS_CRANE_TOOL3) when a container is attached. Otherwise, the container will change position.

Default controls:

- Main arm — AXIS_CRANE_ARM2
- Telescopic boom — AXIS_CRANE_ARM3
- Head tilt — AXIS_CRANE_ARM
- Head rotation — AXIS_CRANE_TOOL2
- Log grab — AXIS_CRANE_TOOL
- Front blade — AXIS_CRANE_ARM4
- Change container grab size — AXIS_CRANE_TOOL3
- Container grab shift — AXIS_CRANE_ARM4

Recommended container mods (by Hispano).

This log trailer consists of two main parts. The front part can be attached to any truck. Then, a telescopic rear part can be attached to it. The rear part is adjustable and perfectly suited for your trees. The set includes a special dolly for the rear part, which can be used to assemble a road train. The front part is adjustable to fit your truck. You can buy the front part with rear parts, or a dolly with rear parts already connected together.

- Shop category: Forestry Equipment;
- Price: Front part: $12,000, Rear part: $22,000, Dolly: $20,000;
- Min. log length: 7 m;
- Color configurations.

Default controls:

- Adjust front part - AXIS_CRANE_ARM3;
- Adjust log length - AXIS_CRANE_ARM2.

If you find any errors or issues, let me know in the comments or at [email protected], and I will fix it in the next version.

This mini-dump truck can be used to transport various types of agricultural crops.

- Price: $80,000;
- Power: 170 hp;
- Max. speed: 40 km/h;
- Capacity: 9,000, 20,000, 30,000 liters.

Configurations:

- Wheels;
- Capacity;
- Beacons;
- Rear hitch;
- Main color;
- Rim color.

If you find any errors or issues, let me know in the comments or at [email protected], and I will fix it in the next version.

Log extension for Claas Xerion and Xerion Saddle Trac tractors.

- Structure configuration: with or without crane;
- Color configurations.

Xerion extension:

- Price: $30,000;
- Optimal log length: 5 m.

Xerion Saddle Trac:

- Price: $35,000;
- Optimal log length: 6 m.

Due to the high center of gravity of the load, it is recommended to move and turn carefully when fully loaded.

This machine can be used for loading/unloading logs and handling transport containers. In your shop, you can choose from 3 main configurations.

- Price: $280,000;
- Power: 317 hp;
- Max. speed: 38 km/h;
- Design configurations;
- Wheel configurations;
- Color configurations;
- Crane/front loader;
- Other configurations;
- Grapple;
- Container grab.

Containers by Hispano are recommended.

If you find any errors or issues, let me know in the comments or at [email protected], and I will fix it in the next version.

This machine can be used to load various products. All front loader tools can also be attached to it.

- Price: $165,000;
- Power: 235 hp;
- Max. speed: 63 km/h;
- Wheel brand configurations;
- Primary color configurations;
- Rim color configurations.

Front bucket:

- Price: $1800;
- Capacity: 2500 l.

Rear bucket:

- Price: 1600;
- Capacity: 1800 l.

With this mod you can look back throw the side window when you are reversing with truck and trailer e.g.(like in ETS 2).You can also lean to front / back or move driver's seat.

- Mod is global and function is added to all vehicles with indoor camera
- You can lean to the front window to see better frontloader tool when operating in high heigh
- You can lean behind the seat to see better back attacher when attaching implement
- Reversing camera is activated when you look to the left in indoor camera
- You can set position of reversing camera, front and back view to fit to any vehicle
- Set position of all camera's positions will be saved for each vehicle in your savegame (also share between players in MP)
- You can move driver's seat forward or backward
- You can quick turn camera forward / backward
- You can activate / deactivate all mod function for each vehicle or as global (these setting is saved in xml config file and will be loaded for each vehicle in all savegame or MP only for you)
- You can enable / disable F1 help (saved as global in xml config file)
- You can activate right reversing camera when you are looking to the right too
- You can easily center indoor camera view at any time
- All controls can be set in your Inputbindings

Controls:

- KEY_space - lean to front / back window
- KEY_KP_minus - move camera outside vehicle (reversing camera)
- KEY_KP_plus - move camera inside vehicle (reversing camera)
- KEY_KP_multiply - move camera forward (rev.camera / front / back view)
- KEY_KP_divide - move camera backward (rev.camera / front / back view)
- KEY_pageup - move driver's seat forward
- KEY_pagedown - move driver's seat backward
- KEY_KP_enter - turn on / off right reverse camera
- KEY_end - quick turn camera forward / backward
- KEY_KP_0 - show / hide F1 help controls
- KEY_KP_period - reset position of reverse camera / seat / front/back view
- MOUSE_BUTTON_MIDDLE - center indoor camera view
- KEY_lctrl KEY_r - turn on / off camera functions for current vehicle (not show in F1 menu)
- KEY_lctrl KEY_lalt KEY_r - turn on / off camera function as global - for all vehicles (not show in F1 menu)

This is set of three log trailers, which have larger space between forks, so you can load / unload them with front loader or big arm loaders.

- Price: 26000 / 29000 / 34000 €
- Additional forks which can be folded / unfolded when you are loading short logs to 3 or 4 piles (15m and 20m trailers)
- Back attacher for trailer and trailerLow to all trailers
- Autoload script edited (logs are now sorted to the piles)
- You can change number of logs piles on your trailer from 1 to 4
- You can switch between piles manually
- You can show unload area to see where logs will be unloaded
- You can show load area to see current pile
- You can move, resize and rotate unload area
- All controls can be set in your Inputbindings
- You can enable / disable F1 help, will be saved as global in xml config file

Controls:

- KEY_X - fold / unfold additional forks (15m and 20m trailers)
- KEY_B - start autoload
- KEY_Y - start unload
- KEY_O - change side (left / right)
- KEY_KP_enter - change number of piles
- KEY_KP_period - switch to next pile
- KEY_KP_minus - shift unload position
- KEY_KP_plus - resize unload position
- KEY_KP_0 - rotate unload position
- KEY_KP_multiply - show / hide load position (current pile)
- KEY_KP_divide - show / hide unload position
- KEY_lctrl KEY_t - show / hide F1 help controls (saved in xml config file)

This mod increases engine RPM when using hydraulic tools and shows RPM.

This is skyline yarder with grapple to pull out logs from hard reachable areas. Just activate yarder, go outside the vehicle, attach yarder rope to some tree near the logs you want to pull out.

- You can attach rope in different height (1-10m).
- You can switch between active yarders and see their status
- You can show rope before attach it to better view direction between tree and yarder
- You can display info about yarder like distance to tree, grapple height, angle to tree etc. in 3 modes
- Can be used as log loader / unloader too but allways activate yarder before operate with logs (it is heavier)
- Always deactivate yarder when transporting it (for less weight of it)
- You can switch exit / entrance to grapple or vehicle
- All controls can be set in your Inputbindings
- There will be xml config file in your game folder where you can change many options
- You can speed up movement of grapple (recomended only if empty)
- Allways park yarder on very flat ground before use or it can be very unstable
- You can optionaly select back trailer attacher (1395 kW is good to towing other vehicles)
- When yardering from 150m or further steering is disabled (due to stability)

Characteristics:

- Price: 410000 €;
- Power: 1896 hp.

Controls:

- KEY_B - activate / deactivate yarder (vehicle)
- KEY_X - attach / detach yarder rope to tree (player)
- KEY_Z - switch to next active yarder (player)
- KEY_V - show / hide yarder rope (player)
- KEY_Y - set yarder rope height (player)
- KEY_lctrl KEY_S - toggle yardering speed (vehicle)
- KEY_lctrl KEY_E - toggle exit / entrance (vehicle)
- KEY_Z - toggle yarder HUD menu (vehicle)
- KEY_lalt KEY_KP_4 / 6 - move yarder HUD left / right (vehicle)
- KEY_lalt KEY_KP_8 / 2 - move yarder HUD up / down (vehicle)

With this mod you can fasten all vehicles / implements on any low loader. So them will never slip out of the trailer again.

- Wheel chocks are showed when you fastened vehicle / implement with wheels
- Count and total mass of fastened vehicles are displayed in F1 menu

Default controls:

- KEY_lctrl KEY_s - Fasten / unfasten vehicles

Most of the low-loaders on Modhub work with this, a few of them not (because they have no proper "dynamicMountAttacherTrigger" defined).

With this mod you can mount universal attacher to all vehicles / implements. So you can attach e.g trailer to vehicle with no attacher.

- Attacher type trailer, trailerLow and Implement
- You can attach multiple trailers / implements together (useful for quick transport)
- You can move attacher so it fits to any vehicle

Default controls:

- KEY_lalt KEY_q - Mount / unmount attacher
- KEY_lalt KEY_KP_4 / 6 - move mounted attacher left / right
- KEY_lalt KEY_KP_8 / 5 - move mounted attacher forward / backward
- KEY_lalt KEY_KP_7 / 9 - move mounted attacher up / down

This mod expands function of all wood harvester in the game.

- Two new keys for manually processing (delimbing) tree forward / backward
- New key for changing cut length down
- Current length of remaining tree to be cut is displayed in F1 menu
- No automatically cut in auto delimb mode (you need to press cut key again)
- You can open settings menu with some options:
Generate woodchips (small amount of woodchips is dropped on ground when delimbing or cutting [Off, 1 - 5])
Delimb accuracy (Number of branches to be removed [70 - 100%])
Minimum / maximum cut length and cut length step for current vehicle
Show / hide mod action in F1 menu
- All controls can be set in your controls settings

Default controls:

- KEY_lshift KEY_r - open settings menu
- KEY_semicolon (; - next to 'L') - delimb tree forward
- KEY_slash (/ - under 'semicolon')- delimb tree backward
- KEY_u - change cut length down

With this wood crusher with extendable table you can quickly turn long logs (up to 10m) to the woodchips.

- You can enter and operate wood crusher even if it is not attached to the truck (crusher is not tabbable)
- When you reach 95% capacity, an audible alarm sounds
- When capacity is full it automaticaly stops crusher and you need to unload woodchips by pipe
- Current fill level is displayed on trailer
- Removable cover
- Work lights on arm and pipe
- Always unfold wood crusher before operating log arm (otherwise it may be unstable)

Information:

- Wheel configurations: Standard / Forestry / Wide tyres
- Capacity: 55000 l
- Price: 320000 €
- Needed power: 250 HP

This mod shows you additional info about loaded wood logs on your trailer.

- Count, total mass and volume of wood logs are displayed in F1 menu
- Mod function is added to all vehicles / trailers with "dynamicMountAttacherTrigger"
- You can activate / deactivate mod function for each vehicle (saved in your savegame)

Default controls:

- KEY_lctrl KEY_w - turn on / off mod function for current vehicle

With this wood slasher you can quickly cut tree logs (up to 22m) to specified length (2-8 m).

- Current length of cut is displayed in the front section of trailer;
- You can enter and operate wood slasher even if it is not attached to the truck;
- You need some loader to load trees to the slasher;
- You can unload processed logs by pressing Unload button;
- Work light for operate in the night;
- Optional back attacher for another trailer.

Information:

- Wheel configurations: standard / forestry / wide tyres;
- Price: 160000 €;
- Needed power: 140 hp.

Controls:

- KEY_B - Turn on saw
- KEY_I - Start / stop unloading
- AXIS_CRANE_ARM - Move table with saw forward / backward
- AXIS_CRANE_ARM2 - Raise / lower table with saw
- AXIS_CRANE_ARM3 - Move back pusher in / out
- AXIS_CRANE_ARM4 - Raise / lower saw

This mod adds sound effects when you are manipulating with wood. Sounds play when:

- Tree log hits other tree log;
- Tree log hits the ground;
- Trees fall down to the ground.

With this machine you can remove tree branches from trees you cut down by feller buncher or chainsaw.

- Just grab bottom of tree to your claws and put it into the delimber. Then close delimber's claws and run the tree throw delimber by moving/rotating your arm
- When delimbed, you can cut tree to specified length by saw placed on the back of the delimber
- Recommended trees size to be process: max 25m
- It only delimbs when claws are closed
- Current length of tree to be cut is displayed in F1 menu and on inside display
- You can enable automatic grab head rotation when delimbing (useful when using combination of keyboard and mouse for controls instead of two joysticks)
- All controls can be set in your controls settings

Characteristics:

- Price: 325000 €;
- Power: 280 hp;
- Max. reach: 10 m.

Controls:

- KEY_b - turn on saw
- KEY_v - turn on / off automatic head rotation

This mod shows you additional info about loaded tree logs on your trailer.

- Count, total mass and volume of tree logs are displayed in F1 menu
- Mod function is added to all vehicles / trailers with "tensionBelt" specialization
- Total transported tree logs count (per session/all time) is displayed in small HUD next to speedometer
- You can resize HUD (you can toggle between 4 sizes or set size manually in xml config file)
- You can move HUD on your screen
- You can activate / deactivate mod function for each vehicle (saved in xml config file)
- All controls can be set in your Inputbindings

Default controls:

- KEY_lctrl KEY_w - turn on / off mod function for current vehicle
- KEY_lctrl KEY_KP_minus - show / hide statistics HUD
- KEY_lctrl KEY_KP_plus - resize HUD
- KEY_lalt KEY_KP_4 / 6 - move HUD left / right
- KEY_lalt KEY_KP_8 / 5 - move HUD up / down

With this machine you can remove tree branches from trees you cut down by feller buncher or chainsaw.

- Just grab bottom of tree to your claws and put it into the delimber. Then close delimber's claws and run the tree throw delimber by moving/rotating your arm.
- When delimbed, you can cut tree to specified length by saw placed on the back of the delimber.
- Recommended trees size to be process: max 25m
- It only delimbs when claws are closed
- Current length of tree to be cut is displayed in F1 menu and on inside display
- You can enable automatic grab head rotation when delimbing (useful when using combination of keyboard and mouse for controls instead of two joysticks)
- All controls can be set in your controls settings

Characteristics:

- Price: 325000 €;
- Power: 280 hp;
- Max. reach: 10 m.

Controls:

- KEY_b - turn on saw
- KEY_v - turn on / off automatic head rotation

This mod shows you additional info about your vehicle like distance traveled in Km, fuel consumption or motor temperature.

- Info is showed in small HUD next to speedometer
- Values are showed for all time and for trip (it can be reset)
- You can switch fuel consumtion between l/h and l/100km (saved as global in xml config file)
- Mod creates xml config file in your game folder where you can change many options
- You can resize HUD (you can toggle between 4 sizes or set size manually in xml config file)
- You can move HUD on your screen
- You can enable / disable F1 help (saved as global in xml config file)
- All controls can be set in your Inputbindings
- You can activate / deactivate mod functions for current vehicle or as global (these setting is saved in xml config file and will be loaded for each vehicle in all savegame or MP only for you)

Controls:

- KEY_lalt KEY_r - reset current trip (distance traveled and fuel consumption)
- KEY_lalt KEY_f - switch fuel consumption (l/h or l/100km)
- KEY_KP_plus - resize HUD
- KEY_KP_minus - show / hide F1 help controls
- KEY_lalt KEY_KP_4 / 6 - move HUD left / right
- KEY_lalt KEY_KP_8 / 5 - move HUD up / down
- KEY_lalt KEY_v - turn on / off mod functions for current vehicle (not show in F1 menu)
- KEY_lctrl KEY_lalt KEY_v - turn on / off mod functions global - for all vehicles (not show in F1 menu)

With this mod you can push materials when your shovel is full filled. The material is then spread out into space as if using leveler.

- Mod is global and function is added to all shovels vehicles / tools
- You can open settings menu in game where you can change all parameters of leveler
- Mod creates xml config file in your game folder for each vehicle where you can change these parameters too
- You can activate / deactivate mod functions for current vehicle (these setting is saved in xml config file and will be loaded for each vehicle in all savegames)
- You can enable / disable F1 help (saved as global in xml config file)
- Position of settings menu can be change in xml config file
- All controls can be set in your Inputbindings

Controls:

- KEY_lalt KEY_KP_enter - open settings menu
- KEY_lalt KEY_KP_multiply / KEY_KP_divide - menu down / up
- KEY_lalt KEY_KP_plus / KEY_KP_minus - change selected value in menu
- KEY_lctrl KEY_r - show / hide F1 help controls
- KEY_lalt KEY_KP_enter - turn on / off mod functions for current vehicle (not show in F1 menu)

With this mod you can look back throw the side window when you are reversing with truck and trailer e.g.(like in ETS 2).You can also lean to front / back or move driver's seat.

- Mod is global and function is added to all vehicles with indoor camera
- You can lean to the front window to see better frontloader tool when operating in high heigh
- You can lean behind the seat to see better back attacher when attaching implement
- Reversing camera is activated when you look to the left in indoor camera
- You can set position of reversing camera, front and back view to fit to any vehicle
- Set position of all camera's positions will be saved for each vehicle in your savegame (also share between players in MP)
- You can move driver's seat forward or backward
- You can quick turn camera forward / backward
- You can activate / deactivate all mod function for each vehicle or as global (these setting is saved in xml config file and will be loaded for each vehicle in all savegame or MP only for you)
- You can enable / disable F1 help (saved as global in xml config file)
- You can activate right reversing camera when you are looking to the right too
- You can easily center indoor camera view at any time
- All controls can be set in your Inputbindings

Controls:

- KEY_space - lean to front / back window
- KEY_KP_minus - move camera outside vehicle (reversing camera)
- KEY_KP_plus - move camera inside vehicle (reversing camera)
- KEY_KP_multiply - move camera forward (rev.camera / front / back view)
- KEY_KP_divide - move camera backward (rev.camera / front / back view)
- KEY_pageup - move driver's seat forward
- KEY_pagedown - move driver's seat backward
- KEY_KP_enter - turn on / off right reverse camera
- KEY_end - quick turn camera forward / backward
- KEY_KP_0 - show / hide F1 help controls
- KEY_KP_period - reset position of reverse camera / seat / front/back view
- MOUSE_BUTTON_MIDDLE - center indoor camera view
- KEY_lctrl KEY_r - turn on / off camera functions for current vehicle (not show in F1 menu)
- KEY_lctrl KEY_lalt KEY_r - turn on / off camera function as global - for all vehicles (not show in F1 menu)

With this mod, your mowers will cut all weeds (flowers, bushes, etc.) in grassy meadows outside the fields.

- The function has been added to all vehicles with the "mower" specialization;
- You can activate/deactivate the mod function for the current equipment.

Control:

- KEY_o - enable/disable the mod for the current equipment.

This is placeable wood crane for unloading logs. It has big grapple so you can grab many logs at once.

- There are two versions in store. Second one has extended side arm so it can be placed over rails or sellpoints (for loading/unloading train eg.)
- The best place is on flat ground, however if you placed it in slope, concrete ramp under crane will show up
- All controls can be set in your Inputbindings
- Price: 120000 € / 140000 €
- Rail range: 35 m
- Max lift: 6 m
- Width: 17 m

Default controls:

- MOUSE LEFT X - crane left/right
- MOUSE LEFT Y - cab forward/backward
- MOUSE RIGHT Y - grapple up/down
- MOUSE LEFT RIGHT X - rotate grapple
- MOUSE LEFT RIGHT Y - close/open grapple

This mod adds more tire tracks on soft terrains (grass, sand, gravel, ...). Mod was originally created for heavy tracked machines but function is added to all wheeled vehicles instead.

- You can activate / deactivate mod function for current vehicle types (it will be saved in config file for all savegames)
- You can activate / deactivate mod function as global for all vehicles
- Only Admin can do this in multiplayer
- All controls can be set in your Inputbindings

Default controls:

- KEY_lalt KEY_t - turn on / off mod function for current vehicle
- KEY_lctrl KEY_t - turn on / off mod function global
- KEY_lshift KEY_t - open settings menu

With this mod you can tow vehicles by towing chain. You can also mount towing hook to vehicles that have no attacher and then attach towing chain to this hook.

- Attach the red end to your vehicle and then attach second end to towed vehicle
- You can attach towing chain to itself when no vehicle is in range (can be used for transport)
- You can take towing chain to the hands and attach it manualy
- Multiple attaching of chains supported
- You can turn on towed vehicle's throttle if necessary
- You can set steering mode of towed vehicle to auto or manual
- In F1 help menu you can see all chains avaiable in your range with info about chain
- You can switch between chains when you are on foot
- You can move mounted hook in all direction so it will fit to any vehicle
- Mod creates xml config file in your game folder where you can change some parameters
- ID of chain is showed in middle of each chain to help (can be turned of in xml config)
- All controls can be set in your Inputbindings
- Price: 600 €

Controls:

- KEY_x - attach / detach towing chain to vehicle (vehicle, onfoot)
- KEY_y - switch to next chain (onfoot)
- KEY_z - mount towing hook (onfoot)
- KEY_b - turn on / off towed vehicle throttle (vehicle)
- KEY_y - switch between steering mode of towed vehicle (off, auto, manual) (vehicle)
- KEY_comma, KEY_period - turn towed vehicle left / right (vehicle)
- KEY_lalt KEY_b - change towed vehicle driving direction (vehicle)
- KEY_lalt KEY_KP_4 / 6 - move mounted hook left / right (onfoot)
- KEY_lalt KEY_KP_8 / 5 - move mounted hook forward / backward (onfoot)
- KEY_lalt KEY_KP_7 / 9 - move mounted hook up / down (onfoot)

This mod increases vehicle motor rpm when using hydraulics tools (moving tools), tipping, unfolding, lifting or rotating implement or moving pipe. Motor rpm is displayed on screen.

- You can resize or move rpm HUD
- You can open settings menu where you can set some options:
- Activate / deactivate increasing motor rpm for each action (only Admin can do this in multiplayer)
- This can be set as global or for current vehicle type (it will be saved in config file for all savegames)
- Show / hide rpm HUD
- Show / hide help in F1 menu
- Set custom size of rpm HUD
- Rpm increase to these values:
- MovingTools: minMotorRpm + 15%
- Tipping: minMotorRpm + 40%
- Folding / unfolding: minMotorRpm + 30%
- Lifting / rotating implement: minMotorRpm + 30%
- Folding / unfolding pipe: minMotorRpm + 10%
- Rpm color switches to red when rpm reach 80% of maxMotorRpm
- All controls can be set in your Inputbindings

Default controls:

- KEY_lshift KEY_w - open settings menu
- KEY_lshift KEY_KP_plus - set size of rpm HUD
- KEY_lalt KEY_KP_4 / 6 - move HUD left / right
- KEY_lalt KEY_KP_8 / 5 - move HUD up / down

- Fixed LUA error when selling wood on Silver Run Forest map with Platinum Edition DLC.
With this machine you can cut tree log to specified length and then split them into small pieces as firewood.
Included placeable sell point where you can sell your firewood and get higher profit (2x than default). It accepts standard wood logs too but profit is the same as in other wood sell points.

- Cut length: 35 - 70cm
- Split options: 2, 4 or 6 pieces
- Input tree log size: max 8m (2 - 6m with selfloader), min diameter: 300mm
- Important: the smaller tree log diameter, the smaller number of split should be done (otherwise wood dissapear)
- Loading options:
1. Put tree log directly to feeder with any loader
2. Put tree log to self loader on left side and press load button
3. Using Autoload (Park machine near tree logs pile and press load button)
- You can unload firewood by using belt (adjustable height)
- Current cut length and diameter are displayed in F1 menu
- All controls can be set in your controls settings

Price: 45000 $ / 100 $

Controls:
KEY_o - Load tree log
KEY_z / KEY_lalt KEY_z - Move tree log forward / backward
KEY_b - Cut tree log
KEY_v - Split tree log
KEY_u - Start / stop unloading firewood
AXIS_CRANE_ARM - Set cut length
AXIS_CRANE_ARM2 - Raise / lower unloading belt
AXIS_CRANE_ARM3 - Set spliting diameter

With this machine, you can cut down trees of different sizes. You can use a ruler to help you find the correct incision size. It can also be used to load logs onto a trailer.

- Price: $295,000;
- Power: 280 hp;
- Maximum. reach: 10 m.

With this refillable wood chipper, you can quickly clear your forest of fallen trees. When you reach capacity, you can dump the wood chips on the ground or onto a larger trailer for transport.

- Price: $450,000;
- Power: 490/530 hp;
- Maximum. speed: 50 km/h;
- Capacity: 30000 l;
- To unload onto trailers, switch the tipside to "high".

Configurations:

- Brand of the wheel;
- Dual wheels;
- EU/US design.

With Jenz Wood Crusher you can quickly turn long logs (up to 12m) into wood chips.

- You can enter and control the crusher even if it is not attached to the truck;
- The current filling level is displayed on the trailer;
- Removable cover.

Other information:

- Wheel configurations: standard / forest / wide tires:
- Capacity: 55000 l;
- Price: $320,000;
- Required power: 250 hp.

With this mod, you will be able to mow grass on all parts of the map. It also mows down all bushes and weeds.

- The function has been added for all machines with the "mower" specialization;
- You can activate/deactivate the mod function for the current car.

Default controls:

- KEY_o - enable/disable the mod function for the current car.

This is a 3-point logging implement, so it can be attached to any tractor. It can chop down trees and process trees into logs of various sizes just like the game lumberjacks.

- Working chamber;
- Working lights;
- Price: $70,000;
- Required power: 190 hp;
- Crane length: 8 m.

If you find any bugs or problems, let me know in the comments or at [email protected] and I will fix it in the next version.

This loader is used to load small pieces of wood. You can clear the area after felling trees

- Price: 230000;
- Maintenance: 145.

Authors: FDR Logging, kenny456

With this mod you can tow vehicles by towing chain. You can also mount towing hook to vehicles that have no attacher and then attach towing chain to this hook.

- 3 sizes available: 1.5m, 2.5m and 3.5m
- Attach the red end to your vehicle and then attach second end to towed vehicle
- You can attach towing chain to itself when no vehicle is in range (can be used for transport)
- Settings menu available with some options
- You can take towing chain to the hands and attach it manualy
- Multiple attaching of chains supported
- You can turn on towed vehicle's throttle if necessary
- You can set steering mode of towed vehicle to auto or manual
- In F1 help menu you can see all chains available in your range with info about chain (range can be set in menu)
- You can switch between chains when you are on foot
- You can move mounted hook in all direction so it will fit to any vehicle
- Id of chain is showed in middle of each chain to help (can be turned off in menu)
- All controls can be set in your Inputbindings
- Price: 1.5m - 500 €, 2.5m - 600 €, 3.5m - 700 €

Controls:

KEY_lshift KEY_t - Open settings menu
KEY_x - attach / detach towing chain to vehicle (vehicle, onfoot)
KEY_y - switch to next chain (onfoot)
KEY_z - mount towing hook (onfoot)
KEY_b - turn on / off towed vehicle throttle (vehicle)
KEY_y - switch between steering mode of towed vehicle (vehicle)
KEY_comma, KEY_period - turn towed vehicle left / right (vehicle)
KEY_lalt KEY_b - change towed vehicle driving direction (vehicle)
KEY_lalt KEY_KP_4 / 6 - move mounted hook left / right (onfoot)
KEY_lalt KEY_KP_8 / 5 - move mounted hook forward / backward (onfoot)
KEY_lalt KEY_KP_7 / 9 - move mounted hook up / down (onfoot)

With this mod, the tree is not automatically pruned after delimbing. You need to click the "Cut" button again.

If you find any bugs or problems, let me know in the comments or at [email protected] and I will fix it in the next version.

This is a 3-point hitch harvester. It is used to process trees into logs of various sizes, just like play lumberjacks.

- You need to switch between crane control or processing head (G key);
- Working chamber;
- Working lights.

Price: $70,000
Required power: 190 hp
Crane length: 8m

If you find any bugs or problems, let me know in the comments or at [email protected] and I will fix it in the next version.

- Added support for tension belts;
- Improved trailer stability.

Important! If you are loading a saved game while the trailer is being expanded, you currently need to minimize and expand it again. Otherwise the trailer will be unstable.
With this machine, you can manipulate tree logs. This is a type of loader with a swivel boom. This allows you to load the entire trailer with long logs from behind the trailer, for example. It is also useful for loading and unloading tree logs in tight spaces.

- Price: $285,000;
- Power: 280 hp;
- Maximum. reach: 10 m.

If you find any bugs or problems, let me know in the comments or at [email protected] and I will fix it in the next version.

A technique that will help you load logs into your truck. Logs can be fastened with straps, or just use a grip for this - the choice is yours.