Mods from the «Trucks» category 560

- Added the second TMM-3M bridge (with retractable supports) for crossing obstacles;
- The archive includes a pontoon (object) in the form of a trailer (for the editor);
- Fixed minor bugs.
Pontoon Park for KRAZ-255B

The pack includes:

1) Tug-motor boat BMK-T is designed for towing individual links, sections of a pontoon bridge during its deployment, towing the bridge ribbon during its turning, movement; for delivering anchors; for towing ferries assembled from the pontoon-bridge park set; for conducting river reconnaissance. It can also be used for ferrying infantry personnel (landing troops), towing non-self-propelled watercraft, patrolling water obstacles, and solving other tasks on water obstacles.

2) Heavy mechanized bridge TMM-3M, was adopted by the Soviet Army in 1974.
The heavy mechanized bridge TMM-3M is intended for creating bridge crossings over obstacles up to 40 m wide and up to 3 m deep in order to allow passage of wheeled and tracked loads weighing up to 60 tons.

3) Fuel tanker TZ-22
TZ-22 is a fuel tanker vehicle developed by the Chelyabinsk Machine-Building Plant. It was put into mass production in 1964. In 1967, it began to be used by the Russian Air Force. The basis for the vehicle was the ChMZAP-5524 semi-trailer and the KRAZ-258 tractor.

4) PMP-60 — a set of a floating bridge, in service with engineering and road (transport) troops of the armed forces of many countries worldwide.

5) Three-axle heavy-duty trailer ChMZAP-520 has a special platform equipped with special devices for loading, unloading, and securing oversized indivisible cargo and tracked vehicles in transport position. The trailer can be operated as part of road trains on paved roads. It was produced by the Chelyabinsk Automobile Trailer Plant since 1957.

3D models and textures author – Maksim Pioneer

6) KRAZ-255B — a Soviet heavy off-road cargo truck with a 6×6 wheel formula. Designed for transporting cargo and personnel on roads and off-road. Created based on the KRAZ-214B, from which it inherited the general layout. Among the main differences are a more powerful and economical YaMZ-238 engine and wide-profile tires with a centralized tire pressure regulation system.

Author – chekhrak

Say thanks to the author – 410011971846472

Hello everyone. I decided to add a little to the KrAZ trucks from here.

I repainted the 260 because the green got a bit tiresome. Replaced the bridge with a new one from here. There is also a boat. I added a couple of semi-trailers to the 260B because there were too few in the original. Also touched up the bumper a bit. The technical specifications remain the same.

The 260B is actually made slightly lower, almost unnoticeable, but the addons (semi-trailers) don’t lift up as much. The 260 has 14 of its own addons and 4 default trailers. The 260B has 10 of its own addons and 3 default semi-trailers. They carry from 2 to 8 cargo points. Enjoy the game.

If you don’t like something – write to me.

Author of these wonderful vehicles is msergt.
Author of the new bridge is sanyates.
Author of the log carrier is Artyom Mokhir (Darius), I’m not sure about the others. I’m afraid to make a mistake, but huge thanks to everyone for your work.

Sterling Tuning. Has its own addons

Model from Spintires - The Original Game
The refinement of the 3D model, addons, and everything else is mine.
Enjoy the game, everyone!

Tuned TITAN. The tuning was done based on a real car, except for the front bumper and bull bar. Huge thanks to the creator of the spirtagan36rus trailer pack, which was used in this mod.

Hello, comrades. I combined two recently released ZIL trucks into one. One has good addons, but I didn’t like the vehicle itself. The other is a great machine, but the addons aren’t very good. So, I decided to crossbreed them.

I added the crane from the old Spinties. ATTENTION! The crane doesn’t work very well; it barely lifts the boom. I had to remove the weight, and it stopped cooperating properly. You need to make the suspension stiffer for it or do something about the crane’s weight—I don’t know. In short, I made it just so it exists for now, and maybe someone who understands this will tweak whatever is needed. Consider yourself warned.

It rotates fine, maybe even able to hook something and pull it out of the swamp. The crane carries the garage (4 points), a bit of straps and fuel. That’s all with the crane. Other addons carry 3 and 6 points of cargo. The device behind the cab also has a strap. I repainted the vehicle and addons for variety, and for those who don’t like it—I saved the original textures in the archive, you can easily find them.

Now about the authors. Vehicle: Vadim Chugainov (WDM), original addons: 133-Sikis84, crane: Roman Sonchak (ronnie), device behind the cab: anonymous.

Bell Equipment offers a wide range of multipurpose 6×6 articulated dump trucks. Various configurations of articulated dump trucks can be equipped with additional options: a scraper as a trailer for construction work, as well as any other additional related equipment (water tanks, trailers, etc.).

The range of BELL articulated dump trucks available in Russia consists of 9 models: B18E, B20E, B25E, B30E, B35E, B40E, B45E, B50E, B60E.

BELL has also developed a range of special machines for various applications:

- Rubber-tracked vehicles for soft ground;
- Large-capacity coal bodies;
- Vehicles equipped with a boom for lifting containers;
- High-capacity log trucks;
- Water or fuel tankers, etc.