Mods for Farming Simulator 2019 9959

- Fixed all errors in the log immediately;
- Currently, the mod only shows 2 warnings about duplicate specialization, because originally the entire moving part of the mod was written through a "fifth degree," I didn't bother digging into it, since ideally, it all needs to be rewritten from scratch, but there's no point in that because it's not an error and it doesn't affect anything. If anyone wants to rewrite it – go ahead, I won't spend my time on it.

UP. The mod will no longer be updated because all errors in the log have been fixed and this is the release version.
Zil 130 - Crane Truck.

- Completely redesigned the entire crane setup;
- Fixed the boom;
- Fixed the cable;
- Fixed the hook;
- Fixed the animations.

Additional details:

Increased the boom lift angle so that loads can be lifted close to the vehicle; completely changed the cable routing – now it properly lifts all the way to the top. Left the hook rotating since the crane originally had no transport position, so the direction it faces doesn’t really matter. The load rotates in all directions along with the hook itself.

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar doesn’t attach, hold RMB+LMB and rotate right or left, and it will attach properly. The price is $30,000.

P.S. The chassis is the original one from the converter author kulibin.

FS17 Author: 36region, Igoryan FS17, kran, -=F@RMeR=-
Converted to FS19: kulibin;
Crane fixed by: MAPBEH.

- Fixed all errors in the log at once;
- Now there is only an informational warning about hydraulics, well, the crane is kind of cable-based, but the entry in it is from Hydra, of course, I will not rewrite its entire original config from scratch, because it is a waste of time since this informational warning does not affect anything.

UP. The mod will no longer be updated because all errors in it have been fixed. The mod is now in the release version.
Liebherr HS875 Crawler Crane:

- Completely redesigned the crane assembly;
- Fixed the boom – now it lowers and raises as it should;
- Fixed the cable;
- Fixed the hook;
- Fixed all animations;
- Fixed the boom counterweight and its interaction animations with the boom and cables.

Additional:

- Added and configured a 980-liter fuel tank + added a fuel gauge for this tank on the in-game dashboard, fuel type – diesel.

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar doesn’t attach, hold RMB+LMB and rotate the hook right or left, and it will attach properly. Price is $100,000.

PS. The chassis and counterweight remain the same, from the authors Giants / Pummelboer, Nonnus.
Authors of the crane and its counterweight: Giants / Pummelboer, Nonnus.
Crane fixed by: MAPBEH.

- Fixed all errors in the log at once;
- Now only an informational warning about hydraulics appears, well, the crane is kind of cable-operated, but the entry in it is from Hydra, of course, I will not rewrite its entire original config from scratch, as it is a waste of time since this informational warning does not affect anything.

UP. The mod will no longer be updated as all errors in it have been fixed. The mod is now in the release version.
Sany SY35U Crawler Crane (essentially a reskin of the Liebherr HS875 crane).

- Completely redesigned the crane assembly;
- Fixed the boom – now it lowers and raises as it should;
- Fixed the cable;
- Fixed the hook;
- Fixed all animations;
- Fixed the boom counterweight and its interaction animations with the boom and cables.

Additional features:

- Added and configured a 980-liter fuel tank + added a fuel gauge for this tank on the in-game dashboard, fuel type – diesel

Attaches to absolutely all spreader bars where the attacher = trailer. If the spreader bar does not attach, hold RMB+LMB and rotate the hook right or left, and it will attach properly. Price is $100,000. Cranes do not conflict with each other (you can use both the base crane without the skin and this one).

PS. The chassis and counterweight remain the same, from the authors Giants / Pummelboer, Nonnus.
Crane and counterweight authors: Giants / Pummelboer, Nonnus.
Crane fixed by: MAPBEH.

- Fixed all errors in the log immediately;
- Reconfigured suspension, differential, wheels, mass (the crane's lifting capacity increased by about 1.5 times).

UP. There will be no more updates for this mod as all errors in the log have been fixed, and the characteristic rebalance to improve the crane's efficiency has been completed, so the mod is now in its release version.
Kamaz Truck Crane - Klintsy. Converted the crane from FS17; all boom animations (+telescoping), cable, hook, driveshaft, suspension, etc. work properly.

Added a 350-liter fuel tank, configured the differential, installed the Kamaz engine, enabled courseplay support (moves freely along routes without issues), animated the dashboard, fully configured lighting (including instrument panel illumination), sound, smoke, dust from the wheels, rearview mirrors, applied dirt + aging effects, removed the stock steering wheel and replaced it with a classic Kamaz steering wheel because the stock wheel made it hard to see the dashboard.

Additional features:

- Removed rotation of the hook itself, but kept the rotating attacher—meaning the load still spins, but the hook does not, as I got tired of constantly straightening it in transport position so it faced vertically. Now it stays perfectly straight in transport position + the ability to rotate the load in any direction is preserved.

- Hooks absolutely all spreader bars where attacher = trailer. If a spreader bar doesn’t hook, hold RMB+LMB and rotate the invisible attacher on the hook right or left, and it will hook properly. Price is $40,000.

Original author in FS17: Eraevgenij
Mod converted to FS19 by: MAPBEH

Changes:

- Redesigned the interior;
- Added color selection;
- Changed the windows.

Most likely, the mod will not be updated.

Ural Next - truck crane. The chassis of the Ural Next by author Axary was taken as a base and modified by me for the Chelyanets crane installation. The crane installation itself was fully converted from FS17 and configured by me.

- The chassis and crane are fully animated, everything works perfectly: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, boom (including telescopic boom), outriggers, cables, hook, etc.;
- Fully configured equipment wear and a completely dirtyable chassis;
- Hooks up to absolutely all traverses where the attacher = trailer. If the traverse does not hook, hold RMB+LMB and rotate the hook, and everything will hook properly. The price is 65,000.

UP. There are no errors in the log because I release this mod directly in the final version; there will be no further revisions for this mod, only hotfixes if necessary.

Chassis author in FS19: Axary.
Crane installation authors in FS17: Eraevgenij, Chev.
Author of the crane installation conversion from FS17 to FS19, as well as its configuration and mod assembly: MAPBEH.

Ural 44202 - truck crane. The chassis of the Ural 44202 by author Axary was taken as a base and modified by me for the Chelyanets crane installation. The crane installation itself was fully converted from FS17 and configured by me.

- The chassis and crane are fully animated, everything works perfectly: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, boom (including telescopic boom), outriggers, cables, hook, etc.;
- Fully configured equipment wear and fully dirtying chassis;
- Attaches to absolutely all traverses where the attacher = trailer. If the traverse does not attach, hold RMB+LMB and rotate the hook, and it will attach fine. The price is 60000.

UP. There are no errors in the log, as I release this mod immediately in the final version; there will be no further improvements for this mod, only hotfixes if necessary.
UP2. Found a way to fix the crooked text near the outrigger deployment button; I will fix it later when I have time, and also on all other cranes.

Chassis author in FS19: Axary.
Crane installation author in FS17: Eraevgenij, Chev.
Converter of the crane installation from FS17 to FS19, as well as its configuration and mod assembly: MAPBEH.