Mods for Farming Simulator 2019 9959

Hitachi log grapple for crane. I took the Hitachi excavator log grapple as a base and modified it to work with cranes.

Features:

- All animations, can grab any dynamic objects and some small machinery with a proper collision model, but is primarily designed for loading and unloading timber and logs using cranes (see screenshots);
- Works on all cranes I have made (grapple control by holding both LMB+RMB simultaneously); functionality on cranes by other authors is not guaranteed since it’s unknown how they implemented crane controls, but on my cranes everything works perfectly;
- Log is completely clean, no errors;
- Price: 15000.

Original version authors in FS 19: BlackSheep Modding, Richwoodrocket;
Mod rework and tuning author: MAPBEH.

Hitachi Grapple for Crane. I took the Hitachi excavator grapple as a base and modified it to work with cranes.

Features:

- Gets dirty, can be washed, all animations included, unique feature of the grapple – a collision model that disables when the buckets open (when the grapple buckets are open, their collision model automatically disables, allowing the buckets to sink into textures like sand (see screenshot), simulating digging, unlike other grapples that just scrape the surface and cannot sink into materials like sand);
- Works on all cranes I have made (grapple control is by holding both LMB+RMB simultaneously). Functionality on cranes by other authors is not guaranteed since it’s unknown how they implemented crane controls, but on my cranes everything works perfectly;
- Log is completely clean if all crops and bulk materials like sand are present on the map (on base maps without sand, a warning will appear that the crop is not found);
- Loads all standard crops + almost all bulk mod materials;
- This grapple will not work on consoles because they do not support the automatic disabling of bucket collision mechanics (an informational warning appears – the mod is intended for PC players only!);
- Grapple capacity: 10,000 liters;
- Price: 10,000.

The mod has been fully tested by me on the Village Berry map and works without any issues.

UP. With the buckets open, the mod sinks into any texture because the bucket collision model is disabled at that moment. To properly place the grapple on the ground or load it onto a vehicle for transport – close the buckets!
UP2. Remember that to load anything, you must own the land plot! You cannot load someone else’s sand without purchasing the sand plot.

Original FS19 version authors: Victor98, perry;
Mod rework and tuning author: MAPBEH.

Spreader beam for lifting machinery and various large-sized objects. I based it on the spreader beam from FS 17 by iksman, converted it to FS 19, and completely reconfigured it so that it can now work with cranes and lift various loads.

Features:

- All animations, can grab any dynamic objects and machinery that have a proper collision model;
- Works on all cranes that I made (control of the spreader beam with held LMB+RMB = side flaps, and with MMB (held mouse wheel) = control of the lower legs), functionality on cranes by other authors is not guaranteed since it’s unknown through which “node” they implemented crane controls; on my cranes, everything works perfectly;
- Log is absolutely clean, no errors, only a single warning about a second component in the i3d file – but this is just the default camera of the 3D editor itself, so this warning does not affect anything;
- Price: 20000.

Original version author in FS17: iksman;
Author of the FS17 to FS19 spreader beam conversion, as well as its refinement and configuration: MAPBEH.

Ural 44202 - fire truck ladder. The base was taken from the Ural 44202 chassis by the author Axary and the fire truck ladder based on the ZIL from FS 17 by the authors arshinskiy03, iksman.

- The chassis and ladder are fully animated, everything works absolutely: lights, dashboard, gearbox, pedals, mirrors, axles, drive shafts, suspension, ladder (including ladder extension), supports, etc.;
- Fully dirtying and wearing chassis;
- The fire truck ladder has a built-in collision model that allows the character to move on it at any ladder incline angle and climb to various heights, and it can also be used as a ladder for cutting down trees. The price is 45000.

UP. There are no errors in the log because I am releasing this mod immediately in the release version; there will be no further improvements to this mod, only hotfixes if necessary.

UP2. I will not repaint it in fire truck colors or add a beacon on the roof because I do not want to cut down trees with fire equipment, so anyone who wants to repaint it – go ahead, the equipment is fully ready, configured, and scripted.

Chassis author in FS19: Axary.
Ladder author in FS17: arshinskiy03, iksman.
Author of the ladder conversion from FS17 to FS19, as well as its settings and mod assembly: MAPBEH.

Chelyabinsk construction crane based on the highly maneuverable Manitou chassis. I used the chassis from a Manitou telescopic loader as the base, where I fixed the support hydraulic cylinder bug – now they work as they should.

Mod features:

- Unique chassis with excellent maneuverability thanks to the choice of 4 movement modes: steering with all 4 wheels, steering with only the front two wheels, crab movement (diagonal) to the left and right respectively – mode selection is controlled by left Ctrl + Y. However, due to this chassis, I had to abandon courseplay because courseplay constantly selects crab mode and drives diagonally either left or right. This is a bug in courseplay itself, as it simply does not account for chassis with selectable driving modes at all (so either we move under our own power or transport it on a trailer; the crane weighs 30 tons);
- Fully functional crane installation, all animations, telescopic boom extension, cable, hook, outriggers, lights, hazard lights, etc. Price is 80,000.

UP. There are no errors in the log because I am releasing this mod immediately in the stable version. There will be no further improvements to this mod, only hotfixes if necessary.

Chassis authors in FS 19: GR40 / CYSG;
Mod assembly and setup author: MAPBEH.

An old Soviet gas station.

- Price: 10000 €;
- Daily maintenance: 10 €;
- Unlimited fuel;
- Night lighting;
- The log is clean.

Authors:

- Textures: Nikita Sobchenko;
- Gas station Model: AVSR;
- Barrel model: Herr Wolf;
- Fire shield model: Vladislav Goryainov;
- Pedestal and visor model: Tonylis;
- Building model: N/A.

P.S. If anyone knows how to animate the arrow at the gas station - write.

Grapple for dynamic objects. Based on the grapple from FS17 by iksman, converted it to FS19 and reconfigured it so that it can be used on cranes.

Mod features:

- Can grab any dynamic objects such as stones for stone crushers, coal, debris, etc. As well as any other small dynamic objects with a proper collision model;
- Fully animated, works on all cranes I have made, functionality on cranes from other authors is not guaranteed since it is unknown through which "joint" they implemented crane control, but on my cranes it works perfectly;
- The log only shows an informational warning that there are 2 objects in the 3D file, but the second object is just the camera of the 3D editor itself, so this warning is not an error and does not affect anything. Price is 15,000.

Author in FS17: iksman;
Mod converted to FS19 and reconfigured by: MAPBEH.